C-MAC PROGRAMMABLE CONVERTER
PCV20 is a programmable multi-area signal converter and isolation amplifier.
PCV20 is equipped with 6 inputs.
- 3 for current.
- 3 for voltage.
It´s therefore possible to configure any input range between 15 μA and 10 A or 15 mV and 1000VAC/1500 VDC to any output within the specified limits.
In addition, at DC inputs it is possible to measure both positive and negative signals.
- AC/DC power input from 15 µA to 10 A
- AC/DC voltage input from 10 mV to 1500VAC/1000VDC
- Frequency for input. Up to 10 kHz
- Analogue and/or pulse outputs
- Galvanic separation between supply, inputs, and outputs
- Supply 24VDC
PCV20 is a programmable multi-area signal converter and isolation amplifier.
PCV20 is equipped with 6 inputs.
- 3 for current.
- 3 for voltage.
It´s therefore possible to configure any input range between 15 μA and 10 A or 15 mV and 1000VAC/1500 VDC to any output within the specified limits.
In addition, at DC inputs it is possible to measure both positive and negative signals.
- AC/DC power input from 15 µA to 10 A
- AC/DC voltage input from 10 mV to 1500VAC/1000VDC
- Frequency for input. Up to 10 kHz
- Analogue and/or pulse outputs
- Galvanic separation between supply, inputs, and outputs
- Supply 24VDC
PCV20 – Programming
To make the configuration of the PCV20, you need a small software program from Comadan.
Download from www.comadan.com – PCV20 or send an email to sales@comadan.com, and ask for it.
Then you connect the PCV20 to your laptop using a standard USB cable.
Run the software and follow the instructions.
When the configuration is completed, the software will guide you in how to make a correct wiring of the PCV20 in according to the actual configuration.
| Mastervarenr. | PCV20 |
|---|---|
| Mastervare | Nej |